If you’re not careful to spray these primers in short bursts from at fair distance away (6-12″ from the model), they can quickly build-up on your model block out fine details on your miniature. You should be aware that general surface primers do not produce the finest applications. In my experience, almost all Rust-Oleum primers work well on miniatures with a few caveats. Rust-Oleum 2x Ultra Cover Flat Gray PrimerĪs a universal primer for applying paint, Rust-Oleum Flat Gray Primer is a popular choice among modelers and miniature painters. A hairdryer has so many uses! If you’re waiting for your first layer of airbrush primer to dry, for example, a hair dryer can be used to speed up the process. To underscore the use of a hair dryer, I highly recommend any miniature painter have a hairdryer near their workstation. Better (and faster) miniature painting with a hair dryer? I think so! To speed up the drying process, you can use a hair blow dryer set to the lowest heat setting. A good quality primer will have a wet sheen that dries into a matte finish (i.e., a non-reflective surface). When you finish priming, allow the primer coat to dry completely. Continue until your entire miniature is coated in a thin layer of primer.Hold the nozzle about 6-12 inches away from your miniatures, and spray using short bursts, sweeping the nozzle back and forth to avoid the primer from pooling in any single area.You should see an even coat of primer that builds up predictably on the surface. Point the nozzle at a piece of cardboard or other surface, and spray a short burst. A dull rattle sound means the primer isn’t mixed well enough. Make sure you can hear the “rattle”, which means that the agitating ball is freely mixing inside primer can. Shake the can well, listening for the agitating ball inside the metal can.To apply a modeling spray primer, follow these five steps:
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |